Guillotine MG-2000

Guillotine MG-2000 so necessary for the road signs production.

It is used for the cutting of the plate metal up to 1,2 mm. it’s good for roofing and tin work. It’s also necessary for the road signs production.

Основные характеристики:

Max cutting length, mm:	2000 mm
Back stop block:	50 – 950 mm, controlled angle (15-90 degr)
Max steel plate gage, mm (s V not more 400 mPa)	1,2
Depth of cut, mm	No limit
Gear system	Manual
Hold –down clip	Pedal cammed
Upper beam height, mm:	145
Knives	4 pcs upper, 4 pcs lower
Dims	1250х2200х1400
Mass, kg:	400
Cost, rub:	195000

Guillotine MG-2000 is made for cutting plate metal manually in conditions of chain and low-volume production road signs. It will satisfy customers who produce covering, sewerage, air outlet port, make roofing and tin works.
The simple and serviceable construction proves long and proper work, its comfortableness lets it make the metal cuttings quickly.

The metal depths of cut have no limit; The hard weld-fabricated construction provides the proper metal cut! The cutline has a straightly long and clear constant pattern. Modern technologies let to prove the high proper, accurate and neat of the cutline with no battered edge. It’s easy to serve and control it according to the modern safety demands. It also has a long work time if it is being used according to the rules of usage.
The set includes – the back stop block with the angle regulation 30-90 degrees and the outreach size 50-950 mm.
The pedal cammed hold-down clip equipped with the rubber precooler that lets to avoid dents and grooves on the metal plates.
4 upper and 4 lower knives are made of proper chisel steel.
Additionally may be delivered:
- The front stop block
- The receiving set for cut metal

The 6 months warranty.